Pierce™ 1-Step Transfer Buffer, 5 x 1 L
Thermo Scientific™ · Protein Electrophoresis & Western Blotting
Thermo Scientific Pierce 1-Step Transfer Buffer is designed for rapid semi-dry transfer of 10-300kDa proteins from polyacrylamide gels (SDS-PAGE) to nitrocellulose or PVDF membranes using the Power Blotter. Features of 1-Step Transfer Buffer: • Fast—high ionic strength formulation provides 5- to 10-minute protein transfer when used with compatible fast semi-dry blotting systems • Ready to use—supplied as a 1X solution that is stable and ready to use at room temperature • Optimized—designed for seamless and reliable performance with the Power Blotter • Compatible—effective with other semi-dry transfer devices equipped with a suitable high-current power supply, including the original Pierce Fast Semi-Dry Blotter (Part No. 88217) • Economical—excellent performance without the special or costly consumables that are required by other fast semi-dry transfer devices When used with the Power Blotter, this buffer provides effective gel-to-membrane transfer of proteins in 5 to 10 minutes with efficiency that is equal to, or better than, conventional Western blotting techniques. Pierce 1-Step Transfer Buffer is also compatible with other protein semi-dry transfer devices, including the original Pierce Fast Semi-Dry Blotter (Part No. 88217), when they are paired with a suitable high-current power supply. Such devices provide constant high current (1.3 to 5.0 amps) to rapidly transfer proteins via the high ionic strength conditions supplied by the transfer buffer. Requires: Power Blotter (Part No. 62288) or other semi-dry transfer device that is equipped or paired with a capable high-current power supply. Fast blotting methods require a high-current power supply, such as the Power Blotter, and an optimized high ionic strength transfer buffer, such as Pierce 1-Step Transfer Buffer. By increasing the current, excellent transfer efficiency can be achieved in much shorter time compared to conventional methods. Amperage is held at a constant rate based on the surface area of the transfer stack(s) (∼22-23 mA/cm2) and voltage is limited to 25 V.
제품 사양
| 버퍼 | Transfer Buffers |
|---|---|
| 농도 | 1 X |
| 젤 유형 | SDS-PAGE Gel (any) |
| 수량 | 5 x 1 L |
| Gel Compatibility | SDS-PAGE Gel |
| Membrane Compatibility | Nitrocellulose, PVDF |
| 제품라인 | Pierce |
| 제품 유형 | Transfer Buffer |
| Unit Size | Each |
규격 / 옵션
| 카탈로그번호 | 규격 |
|---|---|
| 84731X5 | 5 x 1 L |
| 84731 | 1 L |
필요한 시약, 무엇이든 준비해드립니다.
언제든지 문의해 주세요!
salechem@thelabk.com
납기 및 재고 문의
시약 구매 안내
- 본 제품은 실험·연구용 시약/소모품/장비입니다.
- 유해물질 관련 법령에 따라 미성년자에게는 판매하지 않습니다.
- 유해화학물질 시약은 시험·연구·검사용 용도로만 구매·사용 가능합니다.
- 수입 발주 후 취소 요청 시, 별도의 취소수수료가 발생될 수 있습니다.
- 일부 택배불가 제품은 퀵으로만 가능하니 고객센터로 문의해 주세요.
배송 안내
- 재고 보유 중인 제품은 오후 2시 이전 결제 시 당일 출고가 가능합니다.
- 드라이아이스 포장 제품 또는 특정 유독물질의 경우 추가 운임이 발생할 수 있습니다.
- 냉동 / 냉장 제품은 공휴일 및 주말 전일에는 출고가 불가합니다.
교환 / 반품 / 취소
- 제품의 하자 또는 누수가 발생한 경우 별도 수수료 없이 교환 및 반품 가능합니다.
- 제품 수령 후 7일 이후 전 제품 교환 또는 반품 불가합니다.
- 냉장 또는 냉동 제품은 어떠한 경우에도 반품 및 교환이 어렵습니다.
궁금하신 점이 있으시면 언제든지 연락 주세요.
- 전화070-7176-5008
- 이메일salechem@thelabk.com