Alexa Fluor™ 633 NHS Ester (Succinimidyl Ester), 5 mg
Invitrogen™ · Labeling Chemistry, Protein Labeling & Crosslinking
Alexa Fluor™ 633 is a bright and photostable far-red dye with excitation ideally suited to the 633 nm laser line. Used for stable signal generation in imaging and flow cytometry, Alexa Fluor™ 633 dye is water soluble and pH-insensitive from pH 4 to pH 10. Fluorescence of this long-wavelength Alexa Fluor™ dye is not visible to the human eye but is readily detected by most imaging systems. In addition to reactive dye formulations, we offer Alexa Fluor™ 633 dye conjugated to a variety of antibodies, peptides, proteins, tracers, and amplification substrates optimized for cellular labeling and detection. The NHS ester (or succinimidyl ester) of Alexa Fluor™ 633 is the most popular tool for conjugating this dye to a protein or antibody. NHS esters can be used to label to the primary amines (R-NH2) of proteins, amine-modified oligonucleotides, and other amine-containing molecules. The resulting Alexa Fluor™ conjugate will exhibit brighter fluorescence and greater photostability than the conjugates of other spectrally similar fluorophores. Detailed information about this AlexaFluor™ NHS ester: Fluorophore label: Alexa Fluor™ 633 dye Reactive group: NHS ester Reactivity: Primary amines on proteins and ligands, amine-modified oligonucleotides Ex/Em of the conjugate: 621/639 nm Extinction coefficient: 159,000 cm-1M-1 Spectrally similar dyes: Cy5™ Molecular weight: ∼1200 Typical Conjugation Reaction You can conjugate amine-reactive reagents with virtually any protein or peptide (the provided protocol is optimized for IgG antibodies). You can scale the reaction for any amount of protein, but the concentration of the protein should be at least 2 mg/mL for optimal results. We recommend trying three different degrees of labeling, using three different molar ratios of the reactive reagent to protein. The Alexa Fluor™ NHS ester is typically dissolved in high-quality anhydrous dimethylformamide (DMF) or dimethylsulfoxide (DMSO) (D12345), and the reaction is carried out in 0.1–0.2 M sodium bicarbonate buffer, pH 8.3, at room temperature for 1 hour. Because the pKa of the terminal amine is lower than that of the lysine epsilon-amino group, you may achieve more selective labeling of the amine terminus using a buffer closer to neutral pH. Conjugate Purification Labeled antibodies are typically separated from free Alexa Fluor™ dye using a gel filtration column, such as Sephadex™ G-25, BioGel™ P-30, or equivalent. For much larger or smaller proteins, select a gel filtration media with an appropriate molecular weight cut-off or purify by dialysis. We offer several purification kits optimized for different quantities of antibody conjugate: Antibody Conjugate Purification Kit for 0.5-1 mg (A33086) Antibody Conjugate Purification Kit for 20-50 μg (A33087) Antibody Conjugate Purification kit for 50-100 μg (A33088) Learn More About Protein and Antibody Labeling We offer a wide selection of Molecular Probes™ antibody and protein labeling kits to fit your starting material and your experimental setup. See our Antibody Labeling kits or use our Labeling Chemistry Selection Tool for other choices. To learn more about our labeling kits, read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in The Molecular Probes™ Handbook. We’ll Make a Custom Conjugate for You If you can’t find what you’re looking for in our online catalog, we’ll prepare a custom antibody or protein conjugate for you. Our custom conjugation service is efficient and confidential, and we stand by the quality of our work. We are ISO 13485:2000 certified.
제품 사양
| 방출 | 639 nm |
|---|---|
| 여기 | 621 nm |
| 용도(애플리케이션) | Labeling chemistry, protein labeling and crosslinking, protein biology, cell analysis, labeling amines, amine-reactive fluorophores, protein, peptide and antibody labeling, labeling proteins and antibodies with fluorophores |
| 라벨 또는 염료 | Alexa Fluor™ 633 |
| 분자량 | ∽1200 kDa |
| 제품 유형 | NHS Ester (Succinimidyl Ester) |
| 순도 | 95% by HPLC |
| 수량 | 5 mg |
| 보관 버퍼 | 50mM Potassium phosphate (pH 7) |
| 색상 | Purple |
| Unit Size | Each |
규격 / 옵션
| 카탈로그번호 | 규격 |
|---|---|
| A20105 | Purple |
| A20005 | Alexa Fluor |
필요한 시약, 무엇이든 준비해드립니다.
언제든지 문의해 주세요!
salechem@thelabk.com
납기 및 재고 문의
시약 구매 안내
- 본 제품은 실험·연구용 시약/소모품/장비입니다.
- 유해물질 관련 법령에 따라 미성년자에게는 판매하지 않습니다.
- 유해화학물질 시약은 시험·연구·검사용 용도로만 구매·사용 가능합니다.
- 수입 발주 후 취소 요청 시, 별도의 취소수수료가 발생될 수 있습니다.
- 일부 택배불가 제품은 퀵으로만 가능하니 고객센터로 문의해 주세요.
배송 안내
- 재고 보유 중인 제품은 오후 2시 이전 결제 시 당일 출고가 가능합니다.
- 드라이아이스 포장 제품 또는 특정 유독물질의 경우 추가 운임이 발생할 수 있습니다.
- 냉동 / 냉장 제품은 공휴일 및 주말 전일에는 출고가 불가합니다.
교환 / 반품 / 취소
- 제품의 하자 또는 누수가 발생한 경우 별도 수수료 없이 교환 및 반품 가능합니다.
- 제품 수령 후 7일 이후 전 제품 교환 또는 반품 불가합니다.
- 냉장 또는 냉동 제품은 어떠한 경우에도 반품 및 교환이 어렵습니다.
궁금하신 점이 있으시면 언제든지 연락 주세요.
- 전화070-7176-5008
- 이메일salechem@thelabk.com